Vietnam PCBA manufacturing partner · Design to shipment Vietnam · Singapore · Hong Kong · Israel  |  +65 6539 9379
in f

ESD PROTECTION PRACTICES

ESD Control in PCB Assembly: Handling, Storage and Production Practices

Electrostatic discharge can damage susceptible electronic components even when the assembly looks visually normal. For PCBA teams, prevention depends on controlled personnel, work surfaces, tools, packaging and records—not on adding a final visual inspection step.

Handling GuideEngineering & Procurement TeamsESD Control
PROTECTION SYSTEM

Protect The Component Across Every Handoff.

MANUFACTURING EVIDENCE →PRODUCT REQUIREMENTS →
PEOPLEGROUNDING
EPACONTROLLED AREA
PACKINGSHIELDING

FAST ENGINEERING REVIEW

Treat ESD prevention as a documented handling system from receiving through shipment.

Electrostatic discharge can damage susceptible electronic components even when the assembly looks visually normal. For PCBA teams, prevention depends on controlled personnel, work surfaces, tools, packaging and records—not on adding a final visual inspection step.

CONTROL 01

Protected area

Assess grounded benches, tools, handling and personnel.

CONTROL 02

Packaging & transfer

Maintain protection outside the EPA during shipment.

CONTROL 03

Evidence

Document checks, training and nonconformance response.

01

Why ESD Matters During PCBA Manufacturing

An electrostatic discharge may cause immediate failure or contribute to latent damage in susceptible devices. The exposure risk changes through receiving, storage, programming, assembly, inspection, rework and transportation. Each handoff requires a defined control method appropriate to the component sensitivity.

02

ESD Is Not the Same as MSL

Moisture sensitivity concerns package moisture and damage during thermal processing. ESD concerns electrostatic potential and discharge. Both require component-specific instructions but different controls. Review the existing MSL handling guide rather than combining their storage limits.

03

An ESD Protected Area: What Belongs in the Plan

An EPA typically defines protected work areas, grounded or dissipative working surfaces, personnel grounding, verified tools, signage and training. The exact controls and limits should follow the product sensitivity and an approved ESD program. The ESD Association standard explains the purpose of ANSI/ESD S20.20; the article does not certify ANZ to that standard.

04

People, Benches, Tools and Equipment

Review how grounding is verified, how employees are trained, whether handling points are controlled, and how production tools are included. A wrist strap or ESD mat alone does not prove the entire process is protected. Automated equipment may create handling risks that require additional controls.

05

Packaging, Storage and Transport

Sensitive components and assembled boards need packaging appropriate to their transport and storage environment, especially when leaving an EPA. Use supplier-specified packaging and traceability rather than treating any pink bag as protective shielding. Agree on material identification and handling instructions through the build.

06

Monitoring and Evidence for an OEM Audit

Ask about the ESD control plan, staff training, verification frequencies, maintenance of workstations, packaging rules and nonconformance response. Avoid demanding a claimed certification when the buyer actually needs evidence of applied process controls. ANZ’s quality page provides the general framework for asking these manufacturing questions.

07

ESD Controls Across the PCBA Process

Process stage ESD question Typical evidence to request
Incoming Is sensitive packaging maintained? Receiving / storage instruction
SMT setup Are handling interfaces controlled? Workstation setup record
Programming Is the fixture and operator protected? Test station procedure
Rework Are manual contact points controlled? Rework SOP and training
Shipping Is packaging suitable outside the EPA? Packing specification
08

What to Send to Your Assembly Partner

List identified ESD-sensitive devices, required handling and packaging documents, product-level sensitivity assumptions, program-specific requirements and any customer audit questions. Review these inputs together with the PCB assembly process rather than relying only on a generic supplier checklist.

09

Frequently Asked Questions

Can AOI detect ESD damage?

No. AOI checks visible assembly conditions and cannot generally establish whether a device experienced electrostatic damage.

Are moisture-sensitive and ESD-sensitive devices the same?

Not necessarily. MSL and ESD are separate classifications with different risks and controls.

Does a wrist strap alone make an area ESD-safe?

No. Effective ESD protection requires a coordinated program for people, equipment, working surfaces, packaging and verification.

Does mentioning ANSI/ESD S20.20 mean ANZ is certified?

No. Certification or compliance assertions require evidence applicable to the actual facility and scope.

10

Make the Next Manufacturing Decision With Better Evidence

Use this guidance to make acceptance criteria, records and manufacturing handoffs explicit. For product-specific support, contact ANZ with the board files, BOM and your intended verification scope.

<>