What IPC-A-610 Covers—and What It Does Not
IPC-A-610 is an electronics assembly acceptability standard addressing visual acceptability criteria. It does not replace product design verification, electrical qualification, environmental testing or application-specific regulatory requirements. Confirm the current licensed revision and applicable companion documents through IPC standards resources.
Understanding Class 2 and Class 3 Applications
Class 2 is commonly associated with dedicated-service electronic products where extended life and uninterrupted service are desired, while Class 3 addresses high-performance or harsh-environment assemblies where continued performance on demand is critical. Actual class assignment is a customer product and contractual decision; do not infer it automatically from a sector name.
The Difference Is in Specific Acceptance Criteria
Some workmanship features have different acceptability thresholds across classes, depending on the applicable standard and feature. Instead of stating that every solder fillet must be universally “better,” specify the exact product class, revision, selected process and any documented exceptions. Inspectors need the same agreed acceptance references.
How to Write a Useful PCBA RFQ Requirement
State the selected IPC-A-610 class and revision; define applicable J-STD-001 requirements where soldering-process criteria are relevant; identify the acceptance authority, deviations, inspection samples, documentation and rework approval process. Use quality control information to ask the supplier what evidence is actually available, not to assume a certification for Class 3.
Class 3 Does Not Automatically Equal Product Qualification
An assembly that meets visual workmanship requirements may still fail thermal, electrical, vibration, software or system-level functional requirements. Those tests are outside a standalone visual-acceptability claim. Quality planning should connect PCB assembly testing with the product’s end-use risks.
Acceptance Matrix for OEM Buyers
| Contract item | What to record | Why it matters |
|---|---|---|
| Class | Class 2 or 3 | Shared acceptance basis |
| Standard revision | Exact edition agreed | Avoids silent changes |
| Workmanship exceptions | Documented with approval | Prevents surprise rejections |
| Test scope | AOI, X-ray, ICT/FCT as agreed | Visual class is not a test plan |
| Records | Inspection, rework and release requirements | Makes evidence auditable |
| Change control | Who signs off deviations | Controls repeat orders |
Questions to Ask Before Class 3 Is Specified
What failure consequence justifies the class? Which assemblies are included? Can the design be inspected against the intended criteria? Which workmanship and product tests are separately required? Is the procurement team prepared to define acceptance exceptions and evidence? Asking these questions can avoid expensive ambiguity.
A Practical Next Step for a Supplier Review
Send the product application, class and standard edition, PCBA package, known design restrictions and quality-record requirements. ANZ can discuss which manufacturing checks belong in an agreed scope; submit a PCBA RFQ with the relevant acceptance terms.
Frequently Asked Questions
Is IPC-A-610 Class 3 always better than Class 2?
Class 3 specifies different acceptance expectations for high-performance use, but the right choice depends on product requirements; it does not replace functional or environmental validation.
Does meeting IPC-A-610 prove a product is reliable?
No. Workmanship acceptability and product-level reliability are different types of evidence.
Should the RFQ name the standard revision?
Yes. State the agreed class and edition and document any exceptions or additional standards.
Is ANZ automatically certified for Class 3 assembly?
No such claim should be inferred. Confirm the scope of any qualification and the agreed acceptance criteria with the manufacturer.
Make the Next Manufacturing Decision With Better Evidence
Use this guidance to make acceptance criteria, records and manufacturing handoffs explicit. For product-specific support, contact ANZ with the board files, BOM and your intended verification scope.
<>>
